vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODES - Trouble Code 62 FUEL TANK VENT. VALVE VOLTAGE HIGH > < Tank Vent Valve, Remove and Install (X 20 XEV)

SIMTEC 56.1          F2: TROUBLE CODE TABLE

 

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when...

61

 

FUEL TANK VENT. VALVE VOLTAGE LOW

 

19

 

·   Engine not in operating condition:

     engine at a standstill, start and restart

·   Short circuit to ground in circuit to control unit terminal 17

·   Conditions must be fulfilled for at least 5 s

·   No fault recognition at a pulse ratio greater than 99.2 %

 

Effects:

·  Controlled canister purge valve regulation is blocked while oxygen sensor regulation and idle air control remain switched on

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 19 FUEL TANK VENT.

F2: TROUBLE CODES - Trouble Code 62 FUEL TANK VENT. VALVE VOLTAGE HIGH > < Tank Vent Valve, Remove and Install (X 20 XEV)