Vauxhall Workshop Service and Repair Manuals

Special Service Tools for 25 DT OHC Turbodiesel Engine

KM - 828

Guide: To install con - rod on crankshaft.

KM - 830

Adapter: Check engine oil pressure in injunction with KM - 498 - B.

Special Service Tools for 25 DT OHC Tbrbodiesel Engine

1     KM - 81 0

Test Gauge:

To adjust bracket for crankshaft pulse pick - up.

2     KM - 811

Fixing Tool:

To hold camshaft in position.

3     KM - 813

Check Drift:

To check crankshaft TDC position,

4     KM - 815

Installer:

To press crankshaft seal ring in timing case.

5     KM - 814

Locking Device:

To lock f]ywheel / drive disc.

6     KM - 812

Line Wrench:

To loosen and tighten injection line union nut.

Special Service Tools for 25 DT OHC Turbodiesel Engine

1     KM - 816

Installer:

To insert guide bearing in crankshaft.

2     KM - 817

Installer:

To insert seal ring in crankshaft rear end cover.

3     KM - 81 9

Counterhold:

To loosen and tighten torsional vibration damper.

4     KM - 821

Counterhold:

To loosen and tighten visco - fan.

5     KM - 820

Open - ended spanner:

To loosen and tighten visco - fan.

6     KM - 818

Installer:

To insert rear end cover with crankshaft seal ring.

Special Service Tools for 25 DT OHC Turbodiesel Engine

1     KM - 822

Device:

To release tension in upper timing chain.

2     KM - 823

Fixing Pins:

To fix double chain tensioner in position.

3     KM - 825

Remover:

To remove injection pump.

4     KM - 827

Centring Tools:

To centre oil pump.

5     KM - 826

Adjustment Lever:

Basic adjustment of injection pump.

6     KM - 824

Socket Wrench:

To loosen and tighten bearing pins, ribbed V - belt.