· The
fault is only recognized at a transmission output speed above 1024 rpm
and a throttle valve position greater than 12 % and in selector lever
position "1", "2", "3" or "D" after
0.5 s.
· Engine
speed is not recognized by transmission control unit.
Effects:
· Solenoid
valves (brake band, 1 - 2 / 3 - 4 shifting, 2 -
3 shifting, torque converter clutch) and electrohydraulic pressure
regulator are switched off
· If
the fault is recognized, the following gears can still be shifted manually in
each driving stage (emergency program):
"Driving stage"
(gear) "D"(4), "3"(4), "2"(3), "1"(1)
|