Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

KEY 1 PROGRAM ST

Ignition OFF

All doors closed

-

-

Press centre button of infrared transmitter 1

IN RANGE

Note:

Each time a button is pressed, the red LED in the infrared transmitter must illuminate (otherwise battery is flat).

If TECH 1 displays INVALID, infrared transmitter 1 is not programmed or the wrong infrared transmitter has been actuated.

The vehicle is supplied by the manufacturer with two keys whose infrared transmitters are programmed into the central locking control unit.

Therefore, NOT PROGRAMMED is usually displayed for the following parameters: KEY 3 STATUS to KEY 5 STATUS.

If TECH 1 displays OUT OF RANGE, infrared transmitter 1 must be synchronised as follows:

·   Ignition ON

·   Hold infrared transmitter 1 in the immediate vicinity of the infrared receiver in the interior lamp and actuate centre button several times

If TECH 1 does not then show IN

RANGE, infrared transmitter 1 must be reprogrammed.

Programming of infrared transmitter:

see F7:PROGRAMMING.