Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

10

ENG.OIL LEVEL

Ignition OFF

-

INTERN.

ST

Ignition ON

OKAY

Note:

The note for test step no. 09 applies equally for engine oil level too low / fault in circuit.

Test step no. 10 deals with the static engine oil level (recognition when ignition ON); test step no. 09 deals with the dynamic engine oil level (recognition when engine is running or in operation).

In addition, TECH 1 may also display WARNING if the MID has recognised the status OPEN  12V at least 6 times for more than 11 s within the last 20 minutes.

Notes for Trouble-shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

·   If test step no. 08 okay

·   MID defective