Luggage Retaining Net Luggage Retaining Net, Remove and Install
Remove, Disconnect Release adjusters for straps and remove hooks from shackles. |
|
Pull strut of luggage retaining net backwards and remove from holder on roof rails. If necessary, close covers. |
|
Important! There are two installation positions for the luggage retaining net. To use the front position, remove the head rests and fold the backrest forwards. The shackles are on the rear side of the backrest (arrows). The shackles for the rear installation position are located on the load compartment floor. |
|
Install, Connect Open relevant covers on roof rails, attach strut in holders on roof rails and press forwards. Hook straps of luggage retaining net into shackles. Tension belts.
Important! Ensure that the loose ends of the straps face backwards as otherwise the net cannot be tensioned. |
|
|