Affected Terminals: 4, 5, 11, 13, 22 (Plug 26 - pin)
Possible Trouble Codes: 18
Ignition ON
Press F5 in the system main menu, select the desired
test using the arrow buttons and confirm with YES.
Follow the instructions in the TECH 1 display.
After the YES key is actuated again, the driver's mirror
can be moved against both final stops using the arrow keys. After one arrow
key is depressed, the driver's mirror is moved in the corresponding direction
(arrow key Up - > upwards, arrow key DOWN - > downwards).
The displayed value changes continuously within the given
range depending on the programmed final stops.
|
13 % 0.14 V
to
94 % 4.67 V
Driver's mirror moves vertically
|