Affected Terminals: 4, 5, 6, 13, 25 (Plug 26 - pin)
Possible Trouble Codes: 20
Ignition ON
Press F5 in the system main menu, select the desired
test using the arrow buttons and confirm with YES.
Follow the instructions in the TECH 1 display.
After the YES key is actuated again, the co - driver's
mirror can be moved against both final stops using the arrow keys. After one
arrow key is depressed, the co - driver's mirror is moved in the
corresponding direction
(arrow key Up - > left, arrow key DOWN - >
right).
The displayed value changes continuously within the given
range depending on the programmed final stops.
|