|
Affected Terminals: 4, 5, 7, 13, 26 (Plug 26 - pin)
Possible Trouble Codes: 20
Ignition ON
Press F5 in the system main menu, select the desired
test using the arrow buttons and confirm with YES.
Follow the instructions in the TECH 1 display.
After the YES key is actuated again, the co - driver's
mirror can be moved against both final stops using thearrow keys. After one
arrow key is depressed, the co - driver's mirror is moved in the
corresponding direction (arrow key Up - > upwards, arrow key
DOWN - > downwards).
The displayed value changes continuously within the given
range depending on the programmed final stops.
|
13 % 0.14 V
to
94 % 4.67 V
Co - driver's mirror moves vertically
|
