2
|
Voltmeter, range 20 V, DC
|
Voltage supply of electric
outside mirror: mirror adjustment switch S68
|
Wiring harness coupling 9-pin/
Ter. 5 (+)
|
Wiring harness coupling 9-pin/
Ter. 6 (Grnd)
|
· Ignition OFF
· Reconnect wiring harness connection
X11, driver's door/ body
· Remove mirror adjustment switch S68
· Release 9-pin wiring harness connection
between S68 and driver's door wiring harness and disconnect
· Ignition ON
· Measurement at 9-pin wiring harness
coupling
· If nominal value is attained:
proceed
with test step 3
|
higher than
11.5 V
|
|
1. Interruption
or short circuit to ground in driver's door wiring harness between X11/
Ter. 11 and 9-pin wiring harness coupling Ter. 5, mirror adjustment
switch S68
2. Interruption
in driver's door wiring harness between X11/ Ter. 6 and 9-pin wiring
harness coupling Ter. 6, mirror adjustment switch
3. No
contact in lead connection X11
|