Vectra B
|
Moulded Headlining, Sunscreens, Assist Handles
The moulded headlining (1) is a fabric-covered moulded component made of PUR soft foam and natural textile. There are different versions for models 36 and 38 with and without sun roofs (2). The sunscreens (4) are made of PP particle foam covered with TPO foil. The brackets (5) are made of PE plastic. Depending on the equipment version, a vanity mirror is available for the co-driver's side and illuminated vanity mirrors are available for both the driver's and co-driver's sides. The assist handles (3) are made of PP plastic, the bases of PA plastic. All models are standard equipped with two assist handles at the rear and one at the front (co-driver's side). • Service The "Parts and Accessories" Department only supplies moulded headlinings without assembly apertures for the front assist handle. For replacement, cut out the required aperture along the marking using a sharp knife. |
