Instrument Panel Padding, Remove and Install
 Remove, Disconnect Disconnect battery, driver's side airbag unit (4) - see operation "Airbag Unit - Driver's Side, Remove and Install", steering wheel (3) - see operation "Steering Wheel, Remove and Install" in group "M": Signal switch panelling (5), contact unit - see operations: "Contact Unit, Remove and Install (up to MY '98)", "Remove and install contact unit (vehicles as of MY '98)". | 
|
Remove, Disconnect Wiper and signal switch (2) - see operation "Wiper and Signal Switch, Remove and Install" in group "N", signal switch bracket, contact part for steering and ignition lock - see operation "Contact Part for Steering and Ignition Lock, Replace" in group "N", immobiliser control unit - see operation "Immobiliser Control Unit, Remove and Install" in group "J", mixed air nozzle casing, driver's side (1) - see operation "Mixed Air Nozzle Casing - Driver's Side, Remove and Install" in group "D". |
|
Remove, Disconnect Radio (7) - see operation "Radio, Remove and Install" in group "R", heating controls (11) - see operation "Heating Controls, Remove and Install" in group "D", centre mixed air nozzle casing (8) - see operation "Mixed Air Nozzle Casing - Centre, Remove and Install" in group "D", instrument assembly (6) - see operation "Instrument Assembly, Remove and Install" in group "N", glove compartment (10), centre console - see operation "Centre Console, Remove and Install", passenger's side airbag unit (9) - see operation "Airbag Unit, Passenger's Side, Remove and Install", coolant line cover, upper A-pillar inner panelling, lower A-pillar inner panelling. | 
|
Remove, Disconnect Windscreen air duct cover (12) - see operation "Cover - Windscreen Air Duct, Remove and Install" in group "D", footwell panelling, driver's and passenger's side air ducts - see operation "Air Ducts - Driver's and Passenger's Sides, Remove and Install" in group "D", instrument panel padding brace (13), wiring harness plug in engine compartment, ground connection to lower A-pillar, ground connections on steering column bracket, instrument panel padding, instrument panel wiring harness - see operation "Wiring Harness - Instrument Panel, Remove and Install" in group "N", fuse box cover (14), detach fuse box. | 
|
 Install, Connect Wiring harness for instrument panel, instrument panel padding, ground connections to steering column bracket, ground connections to lower A-pillar, wiring harness plug in engine compartment, fuse box, fuse box cover, instrument panel padding brace, driver 's and passenger's side air ducts, footwell panelling, windscreen air duct cover, lower A-pillar inner panelling, upper A-pillar inner panelling, coolant line cover, passenger's side airbag unit, centre console, glove compartment, instrument assembly, centre mixed air nozzle casing, heating controls, radio. Centre mixed air nozzle casing, signal switch bracket, wiper and signal switch, immobiliser control unit, contact part for steering and ignition lock, contact unit - see operations: "Contact Unit, Remove and Install (up to MY '98)", "Remove and install contact unit (vehicles as of MY '98)". Install signal switch panelling, steering wheel - see operation "Steering Wheel, Remove and Install" in group "M": Notice: Attach airbag warning sticker to new instrument panel padding near A-pillar, passenger's side. After reconnecting battery, reprogram volatile memories.
|
