Guide with Locking Lever, Replace
 Remove, Disconnect Control unit - see operation "Control Unit, Remove and Install". Water deflector panel, drive, pull out side guide with actuation cable from the guide rails. Guide with lock lever from side guide (1) - snap ring (2) and connecting pin (3).
 Install, Connect | 
|
Guide with lock lever to side guide. Slide side guide with actuation cable into guide rail. | 
|
 Adjust Basic adjustment of both actuation cables - see operation "Both Actuation Cables, Basic Adjustment". Adjust drive.
Install, Connect Water deflector panel, drive, control unit.
|
