Remove front wheel. Unscrew bolt (2). Carefully withdraw wheel speed sensor (1) from bracket. Detach cable for wheel speed sensor from clips on spring strut and wheel well. Unclip wiring harness plug (3) - ensure cable routing is correct. Remove wheel speed sensor.
 Install, Connect Connect wiring harness plug initially. Insert cable for wheel speed sensor into corresponding clips - ensure correct cable routing. Attach wheel speed sensor to bracket. Attach front wheel.
 Tighten (Torque) Wheel speed sensor to bracket - 8 Nm / 6 lbf. ft. Wheel to wheel hub - 110 Nm / 81 lbf. ft.
 Inspect Perform function check: the check can be performed with "TECH 1/TECH 1A" or with "TECH 2" in conjunction with the relevant "Opel/Vauxhall MSC, Vectra-B MY '96" program module - see relevant Checking Procedures. | 
Remove, Disconnect 
