Recommended Torque Values (Group H)
|
|
Nm |
|
Cover plate to steering knuckle |
4 |
|
ABS control unit to hydraulic modulator (ABS-415) |
6 + 7 1) |
|
ABS control unit to hydraulic modulator (ABS-430) |
4.5 |
|
ABS control unit to hydraulic modulator (ABS-5.3/TC) |
2.6 |
|
Brake servo to main bracket |
18 2) |
|
Brake line to brake pressure hose |
16 |
|
Brake line to hydraulic modulator |
16 |
|
Brake line to brake calliper |
16 |
|
Brake lines to master brake cylinder |
16 |
|
Brake calliper to brake backing (front wheel brake) |
30 |
1) Tighten fastening bolts with 6 Nm / 4 lbf. ft., then with 7 Nm / 5 lbf. ft. 2) Use new fastening nuts.
Recommended Torque Values (Continued)
|
|
Nm |
|
Brake calliper to trailing link (rear wheel brake) |
80 1) |
|
Brake disc to rear wheel hub |
4 |
|
Brake disc to front wheel hub (M10 x 1.25) |
4 |
|
Brake disc to front wheel hub (M6 x 1) |
7 |
|
Brake carrier to steering knuckle (front wheel brake) |
95 1) |
|
Brake drum to rear wheel hub |
4 |
|
Torque support bracket to wheel well |
60 |
|
Torque support bracket to cylinder block |
60 |
|
Bleeder screw to brake calliper |
6 |
|
Bleeder screw to wheel brake cylinder |
6 |
1) Insert new fastening bolts with bolt locking compound (red).
Recommended Torque Values (Continued)
|
|
Nm |
|
Brake servo main bracket to bulkhead |
20 1) |
|
Wheel speed sensor bracket to steering knuckle |
8 |
|
Hydraulic modulator bracket to front frame and support |
20 |
|
Parking brake lever to vehicle underbody |
10 |
|
Master brake cylinder to brake servo |
22 |
|
Banjo bolt to brake calliper |
40 |
|
Hydraulic modulator to bracket |
8 |
|
Piston rod locking nut to adjusting piece |
18 |
|
Upper nut for brake servo |
20 |
|
Pedal support to retainer |
20 |
1) Use new fastening nuts.
Recommended Torque Values (Continued)
|
|
Nm |
|
Wheel to wheel hub |
110 |
|
Wheel brake cylinder to brake anchor plate |
9 |
|
Parking brake telltale switch to parking brake lever |
2.5 |
|
Screen wiper motor to mount |
3.5 |
|
Wheel speed sensor to bracket |
8 |
|
Union bolts of all brake lines |
16 |
|
Brake servo vacuum line to inlet manifold |
18 |
|
Brake servo vacuum line to vacuum pump |
18 |
|
Lower bolt for brake servo |
20 |
|
Connecting piece to brake line |
16 |
|
