Brake Linings and Brake Discs, Check for Wear
 Remove, Disconnect Remove brake linings - see operation "Brake Linings - Front Wheel Brake, Remove and Install" or "Brake Linings - Rear Wheel Brake, Remove and Install".
 Inspect Measure remaining thickness of brake linings and thickness of brake discs using MKM-230-A (1). Permissible minimum thickness of brake linings with lining plate:
|
Rear brake linings - 6.7 mm. |
|
Front brake linings - 7.5 mm. |
| 
|
Inspect Permissible minimum thickness of brake disc:
|
Front brake disc: |
|
|
All engines except Y 16 XE, X 20 XEV, X 25 XE, Y 26 SE, C 20 SEL, C 22 SEL: |
21 mm |
|
Y 16 XE, X 20 XEV, X 25 XE, Y 26 SE, C 20 SEL, C 22 SEL: |
22 mm |
|
Rear brake Disc: |
8 mm |
For nominal values see also "Technical Data".
 Install, Connect Attach brake linings - see operation "Brake Linings - Front Wheel Brake, Remove and Install" or "Brake Linings - Rear Wheel Brake, Remove and Install". | 
|
|
