Vauxhall Workshop Service and Repair Manuals

Parking Brake, Adjust (Vehicles with Disc Brake)  

  Remove, Disconnect   

Raise vehicle. Release parking brake. Remove rear wheels.     Adjust    Turn adjustment nut (1) at adjustment unit, until brake disc is blocked. Turn adjustment nut back, until brake disc just runs freely.     Install, Connect    Attach rear wheels, lower vehicle.     Tighten (Torque)    Wheel to wheel hub - 110 Nm / 81 lbf. ft.     Adjust    Position parking brake lever on 4th detent. Turn nuts (2) on parking brake lever until both rear wheels can still just be turned by hand. The braking effect must be the same for both wheels.

  Install, Connect   

Install folding cover.  

  Adjust   

Make short running-in journey of approx. 300 m/328 yards at low speed with parking brake slightly applied.