Remove air cleaner housing - see operation "Air Cleaner Housing, Remove and Install". Remove fastening bolts (1) and (2) and remove reaction member support and reaction member bracket. Mark running direction of ribbed V-belt. Tension ribbed V-belt tension roller using KM-913-A (3) in direction of arrow (clockwise) and remove ribbed V-belt.
 Install, Connect Mount ribbed V-belt - tension ribbed V-belt via ribbed V-belt tension roller and KM-913-A. Note running direction and installation position of ribbed V-belt. Install reaction member support and reaction member bracket - tightening torque 60 Nm / 44 lbf. ft. Install air cleaner housing - see operation "Air Cleaner Housing, Remove and Install". | 
Remove, Disconnect 