Toothed Belt Guide Roller, Remove and Install
Remove, Disconnect
Remove toothed belt - see operation "Toothed Belt, Remove and Install".
Remove toothed belt guide roller (1) intake side or toothed belt guide roller (2) exhaust side from cylinder head.
Install, Connect
Install toothed belt guide pulley (1), intake side or toothed belt guide pulley (2), exhaust side at cylinder head - 25 Nm / 18.5 lbf. ft.
Install toothed belt - see operation "Toothed Belt, Remove and Install".
Important!
The toothed belt guide roller with the larger diameter (1) is installed on the intake side.
Remove, Disconnect 
Install, Connect 
Important! 