Bowden Cable - Cruise Control, Remove and Install (X 25 XE)
Remove, Disconnect
Remove hydraulic modulator - see operation "Hydraulic Modulator with ABS Control Unit, Remove and Install (Vehicles with ABS 5/TC)" in group "H".
1 Remove retainer,
2 Prise off accelerator Bowden cable from ball head,
3 lever off retainer and remove cruise control Bowden cable from ball head.
Remove cruise control Bowden cable from retainer by pressing catches (arrows) together.
Disconnect cruise control Bowden cable from actuator by rotating the guide tube 1/4 turn to left.
Detach cruise control Bowden cable from actuator (arrow).
Install, Connect
Attach cruise control Bowden cable to actuator and screw to actuator with 1/4 turn to right.
Attach cruise control Bowden cable to retainer and engage.
Connect cruise control Bowden cable to ball head and fasten with retaining ring.
Attach accelerator Bowden cable to ball head and secure with retaining clips.
Install hydraulic modulator - see operation "Hydraulic Modulator with ABS Control Unit, Remove and Install (vehicles with ABS 5/TC)" in group "H".
Inspect
Adjust cruise control Bowden cable - see operation "Cruise Control Bowden Cable, Adjust".
Remove, Disconnect 
Install, Connect 
Inspect 