vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Cruise Control Bowden Cable, Remove and Install (X25XE) > < Switchover Valve - Solenoid Valve, Remove and Install

Vectra B

 

Camshaft Sensor, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

For X 25 XE: Detach wiring harness plug for pressure sensor of power steering pump (1) from bracket. Release wiring harness plug bracket and turn to the side.  

Disconnect camshaft sensor wiring harness plug (2). Remove cable straps.  

For Y 26 SE: Disconnect wiring harness plug for camshaft sensor (3). Remove cable ties.  

Object Number: 2401925 Size: DEFAULT

 

 

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Detach camshaft sensor (1) from camshaft bearing cover.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Attach camshaft sensor to camshaft bearing cap - 8 Nm / 6 lbf. ft.  

Connect wiring harness plug for camshaft sensor to wiring trough. Secure cable with cable ties. Secure wiring harness plug bracket.  

For X 25 XE: Slide on wiring harness plug for pressure sensor of power steering pump.  

Object Number: 2401924 Size: DEFAULT

 

 

Cruise Control Bowden Cable, Remove and Install (X25XE) > < Switchover Valve - Solenoid Valve, Remove and Install