Remove air cleaner housing - see illustration "Air Cleaner Housing, Air Flow Guide (X 16 SZR)". Mark running direction of ribbed V-belt. Tension ribbed V-belt clockwise using ribbed V-belt tension roller and KM-913-A and take ribbed V-belt out of pulleys. Remove upper part of front toothed belt cover (1).
Inspect At fastening bolt of toothed belt drive gear, turn crankshaft slowly and smoothly in direction of engine rotation to mark (3). At the same time, the notches (2) on the camshaft sprocket and the rear toothed belt cover must be aligned. If timing marks are not correctly adjusted - see operation "Timing, Adjust (X 16 SZR)". |