Inspect
Check adjustment of the control cable of the selector actuation. Bring selector lever consecutively in positions "P, R, N, D, 3, 2, 1" - pull knob to first or second stop. Actuating lever at transmission must engage at: "P" (foremost position, "2"), "R", "N", (1), "D", "3", "2", "1".
If actuation lever does not engage:
Remove, Disconnect
Remove battery - to do this, disconnect small relay box from bracket on battery and lay aside. Remove wiring harness plugs (3 and 4) from battery case and disconnect. If necessary: Remove reservoir for hydraulic system from battery case (2 bolts).