Wiring Harness Plug, Control Unit The automatic transmissions in the Vectra-B are equipped with a spray-waterproof 42-pin wiring harness plug, with differently sized plug contacts. Terminal assignment, occupied connections only:
2 |
Selector lever, position "1" |
3 |
Selector lever, position "3" |
4 |
Clutch C1 open/closed |
5 |
Torque control, |
|
ignition retard |
6 |
"Winter program" telltale |
7 |
Throttle valve engine load signal |
8 |
Engine speed sensor |
9 |
Transmission input |
|
speed sensor |
10 |
Transmission output |
|
speed sensor |
11 |
Diagnostic lead X13 |
12 |
Electronic cruise control |
13 |
Transmission fluid temperature sensor |
15 |
"Winter program" tip switch |
16 |
Brake lamp switch |
17 |
AF 13 |
Solenoid valve, |
|
|
2-3 shift |
|
AF 20/22 |
Solenoid valve, |
|
|
1-2/3-4 shift |
18 |
AF 13 |
Unoccupied |
|
AF 20/22 |
Solenoid valve, |
|
|
neutral position |
|
|
4.2.3 Wiring Harness Plug, Control Unit (continued) The automatic transmissions in the Vectra-B are equipped with a spray-waterproof 42-pin wiring harness plug, with differently sized plug contacts. Terminal assignment, occupied connections only:
19 |
Solenoid valve, converter clutch |
20 |
Battery positive (terminal 30) |
21 |
Ignition ON (terminal 15) |
24 |
Selector lever, position "2" |
25 |
Selector lever, position "D" |
26 |
"Malfunction/program display" telltale |
27 |
Instrument panel telltale |
28 |
TC, input reduced throttle valve signal |
31 |
Ground, transmission output speed sensor |
35 |
"Sport/economy program" tip switch |
36 |
Kickdown switch |
38 |
Ground, pressure regulator solenoid valve |
39 |
AF 13 |
Solenoid valve, |
|
|
1-2/3-4 shift |
|
AF 20/22 |
Solenoid valve, |
|
|
2-3 shift |
40 |
Solenoid valve, pressure regulator |
41 |
Ground (terminal 31) |
42 |
Ground (terminal 31) |
|
|
|