Remove footwell panelling, right (3 clamps). With LHD vehicles: remove glove compartment - see operation "Glove Compartment, Remove and Install" in group "C". With all vehicles: disconnect wiring harness plug from control unit - to do this, release clamp lock (3). Bend up bracket (1) carefully towards footwell and remove control unit (2).
Install, Connect Insert control unit. Connect wiring harness plug and lock. With LHD vehicles: install glove compartment - see operation "Glove Compartment, Remove and Install" in group "C". With all vehicles: install footwell panelling, right (3 clamps). |