Vauxhall Workshop Service and Repair Manuals

 

Planetary Gear Set P2, Check (AF 20/22)     Inspect    Check toothing and mount of the planetary gear set P2 for damage and wear. If necessary replace the assembly. Overhaul of the planetary gear set is not provided for.     Measure    Measure tensioning of the planetary gear set P2 with hex socket wrench (1) size 36 and MKM-536-A (2). Clamp assembly with KM-696 in vice. Secure with upper fixing bolt (3) against turning. Allow fixing bolt (3) to rest with the thread at the sides of the recess (arrow); do not lock against the planetary gears by tightening (in which case the component is no longer turnable). Carry out several measurements and take average value.   Starting torque: 0.55 to 1.35 Nm / 0.4 to 0.9 lbf. ft.