Vauxhall Workshop Service and Repair Manuals

Operations on Transmission Shift Linkage  

Unlocking selector lever lock in case of malfunction.  

Notice: 

If vehicle has a longer lay-up time (e.g. overnight), selector lever should be in position "P" to prevent battery from draining. To prevent battery from draining during longer lay-up times, including overnight, always remove ignition key.  

  Remove, Disconnect   

Ignition OFF   Release side of shift cover at lugs (1) and carefully draw upwards (I) ensuring that wiring harness for winter programme switch is not damaged. Push the yellow lever (2) for the selector lever lock downward with a pin or ball-point pen and hold in this position (II) moving selector lever out of "P" position (III).     Install, Connect    Clip switch cover onto centre console.