vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Selector Lever|Description and Operation > < Ignition Lock Release Switch, Replace

Vectra B

 

Replace selector lever lock switch  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove selector lever cover (1). Unclip selector lever guide (2) and detach cable. Unscrew nut (4) and lay selector lever aside.  

Object Number: 2402138 Size: DEFAULT

 

 

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Disconnect ground cable and disconnect wiring harness plug from solenoid switch. Remove both small retaining plates (arrow) and remove selector lever pawl switch (1).  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Insert selector lever pawl switch (1) and attach both small retaining plates (arrow) with suitable tool. Connect wiring harness plug to solenoid switch and attach ground cable. Align selector lever and secure. Clip in selector lever guide and attach cable. Install selector lever cover.  

Object Number: 2402290 Size: DEFAULT
Related Literature Units
-
-

Selector Lever|Description and Operation > < Ignition Lock Release Switch, Replace