Vauxhall Workshop Service and Repair Manuals

Recommended Torque Values, Clutch and Transmission (Group K) MT  

	Nm
Flywheel cover plate to transmission (X 16 SZR without air conditioning, 16 LZ2 and X 17 DT)	7
Drive gear (driven) to differential housing (except F 25)	70 1)
Drive gear (driven) to differential housing (F 25 only)	65
Bridge for locking pin to end shield (all transmissions except F 25)	7
Differential cover:   Sheet metal version (all transmissions except F 25)	30
Light alloy version (all transmissions except F 25)	18
F 18 transmission	40
Shift cover to transmission (all transmissions except F 25)	15
Transmission cover to transmission housing (F 25 only)	22
Sealing flange to transmission housing or clutch housing (F 25 only)	22
Pressure line to central release	14
Vent valve to connection piece	9

1)  turn further by 30 ° to 45 °  

Recommended Torque Values, Clutch and Transmission (Continued)  

	Nm
Transmission to fluid pan - M8	20
Transmission to fluid pan - M10	40
Transmission to cylinder block	60
Transmission housing to clutch housing (F 25 only)	22
Engine mount bracket, front left, to transmission	60
Clutch pressure plate to flywheel (except F 25)	15
Clutch pressure plate to flywheel (only F 25)	28
Bearing support for rocker arm to end shield (all transmissions except F 25)	22
Bearing support with pawl to end shield (all transmissions except F 25)	7
Bearing flange for differential to transmission	25 1)
Bearing flange for drive shaft bearing to transmission (F 25 only)	40

1)  Recut thread and insert bolts with locking compound.  

Recommended Torque Values, Clutch and Transmission (Continued)  

	Nm
End shield and end shield cover to transmission:   M7 (all transmissions except F 25)	15
M8 (all transmissions except F 25)	20
Bearing support to clutch housing to transmission (F 25 only):             bolt seated outside	22
Remaining three bolts	40
Carrier to shift rod (F 25 only)	22
Engine mount, front left, to front axle body	45
Drain plug to transmission (F 25 only)	50
Fluid filler plug to transmission (F 25 only)	50
Fluid checking bolt to transmission:   F 13/F 18	4 1)
F 15 / F 17	30
F 23	35
F 25	50
Wheel bolts	110

1)  turn further by 45 ° to 180 °  

Recommended Torque Values, Clutch and Transmission (Continued)  

	Nm
Reversing lamp switch to transmission (except F 25)	20
Reversing lamp switch to transmission (F 25 only)	22
Shift housing (gearshift lever) to underbody	6
Shift mechanism and shift linkage lever to clutch housing (F 25 only)	22
Bolt for shift rod clamp	12 + 180 °
Locking plate to adjustment nut for tapered roller bearing (differential) (all transmissions except F 25)	9
Central release to transmission	5