Vectra B
|
Power Flow in F17 Manual Transmission General The flow of power in the F17 manual transmission runs mainly via the drive shaft (2) and the relevant gears to the main shaft (1). The drive power is transferred via the output gear (3) from the main shaft to the differential (4) and from there to the drive shafts.
The illustration shows the power flow in 1st gear.
Power Flow in the Individual Gears The following illustrations show the power flow in the individual gears in detail. Shift status - 1st gear
3.1.5.2 Power Flow in the Individual Gears (continued) Shift status - 2nd gear
3.1.5.2 Power Flow in the Individual Gears (continued) Shift status - 3rd gear
3.1.5.2 Power Flow in the Individual Gears (continued) Shift status - 4th gear
3.1.5.2 Power Flow in the Individual Gears (continued) Shift status - 5th gear
3.1.5.2 Power Flow in the Individual Gears (continued) Shift status - reverse gear
|
