vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Tapered Roller Bearing Outer Race of Drive Shaft in Clutch Housing, Replace (F 25) > < Oil Contamination in Upper Area of Transmission Aggregate or on Bulkhead

Vectra B

 

Tapered Roller Bearing Inner Race on Reduction Gear for 1st Gear on Drive Shaft, Replace (F 25)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Clamp drive shaft with KM-867 (1) and Tensioner KM-863 (2). Press tapered roller bearing inner race from drive shaft.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Position tapered roller bearing inner race on drive shaft - note installation position. Press bearing with sleeve of Tool KM-866 (3) to the stop.  

Object Number: 616201 Size: DEFAULT  Important!   

When clamping drive shaft in press, proceed carefully to ensure that surface of drive shaft does not get damaged.  

Object Number: 2400476 Size: DEFAULT

 

 
Related Literature Units
-
-

Tapered Roller Bearing Outer Race of Drive Shaft in Clutch Housing, Replace (F 25) > < Oil Contamination in Upper Area of Transmission Aggregate or on Bulkhead