Tapered Roller Bearing Outer Race of Drive Shaft in Clutch Housing, Replace (F 25)
Tapered Roller Bearing Outer Race of Drive Shaft in Clutch Housing, Replace (F 25)
Remove, Disconnect
Press tapered roller bearing outer race for drive shaft out of clutch housing with KM-708 - counterhold with KM-500-2.
Install, Connect
Insert tapered roller bearing outer race (1) for drive shaft into bore with plastic mallet. Drive in tapered roller bearing outer race for drive shaft to stop (1) with KM-868 (2) - counterhold with KM-869 and KM-514.