Axle Shaft Seal Ring in Clutch Housing Gasket Flange, Replace (F 25)
Remove, Disconnect
Remove sealing flange - 4 bolts. Press out axle shaft seal ring with KM-523-3 (1) and KM-523-1 (2) - counterhold with KM-613-1 (3).
Install, Connect
Press in new axle shaft seal ring with KM-519 (5) to the stop - counterhold with KM-613-1 (4).
Install sealing flange with new O-ring (4 bolts) - tighten bolts alternately - tightening torque 22 Nm / 16 lbf. ft.