Field Remedy: 1012
| Subject: |
Transmission - Oil contamination |
| Models: |
Engines: |
Option: |
| Vectra-B 1996...1998,5,Calibra
1990...1997,Sintra 97...98 |
X25XE| C25XE,X25XE| C25XE,X22XE |
MT F25 |
| Complaint: |
Oil contamination of the upper transmission
compartment or the engine bay bulkhead. |
| Cause: |
At high speed condition the transmission oil
starts foaming and comes out through the gearshift adjusting
pin. |
| Production: |
|
Remedy:
1. Check the oil level in accordance to the Service Instructions and correct if necessary.
2. Remove adjusting pin and install new plug Part-/Cat-No.: 90 105 651 / 07 55 709.
It is not recommended to use different oil discribed in the Service Instructions.
For durabillity reasons only oil
Part-/Cat-No.: 09 120 541 / 19 40 768 has to be used.
Please asure that there is no additional breather installed. Only the orginal
plug Part-/Cat-No.: 90 446 270 / 07 02 219 must be fitted (pls. see Service-Literature).
Labour operation: Carline: TC: Hours:
Adjust transmission
oil level
T 8101 20 Vectra-B 92 0.3hrs
T 8101 21 Calibra 92 0.3hrs
T 8101 22 Sintra 92 0.3hrs
The regular warranty procedure should be used for claiming
Set-up-time
| FunctionalGroup: |
K - Clutch/Transmission |
| Complaint Group: |
10 - Leakages |
| Trouble Code: |
Non |
|
