Remove affected axle shaft from transmission - see operation "Axle Shaft, Remove and Install" in group "E". Only for V6 and Y 22 DTR: Remove intermediate shaft - see operation "Intermediate Shaft, Remove and Install" in group "E". With all vehicles: remove affected axle shaft seal ring with MKM-557 (1).
Install, Connect Coat new axle shaft seal ring with transmission fluid and drive in:
For F 13, F 15 and F 17 |
- use KM-446-5 (2). |
For F 18, F 18+ and F 25, F 35 |
- use KM-519. |
Install intermediate shaft (only for V6 and Y 22 DTR) and axle shaft - see operation "Intermediate Shaft, Remove and Install" and "Axle Shaft, Remove and Install" in group "E". |
|