Tapered Roller Bearing Outer Race for Differential in Clutch Housing, Replace (F 25)
Tapered Roller Bearing Outer Race for Differential in Clutch Housing, Replace (F 25)
Remove, Disconnect
Remove sealing flange - 4 bolts. Drive out tapered roller bearing outer race with KM-672 (1) - the bearing outer race is then destroyed.
Install, Connect
Press in new tapered roller bearing outer race with KM-523-1 (2) and KM-523-4 (3) to stop. Install gasket flange with new O-ring - 4 bolts. Tighten bolts alternately - tightening torque 22 Nm / 16 lbf. ft.