The hydraulic system is topped up with Special Fluid Dexron ® II.
Use dipstick in fluid reservoir screw-on cover to check fluid level.
Inspect
Fluid is initially filled up to "MAX" mark (1) with engine off.
Start engine and a second mechanic should immediately top up fluid to lower "MIN" mark (2) and allow engine to run.
Important!
Power steering pump must not be allowed to run dry.
Inspect
With engine running turn steering wheel slowly left and right 2 to 3 times approx. 45 ° and then twice from limit stop to limit stop. Re-check fluid level in fluid reservoir, and correct if necessary.
Inspect
Stop engine and check fluid level.
Fluid level at approx. 20 ° C/68 ° F: between "MIN" (2) and "MAX" (1) marks.
Important!
It is not permitted to re-use drained fluid.
Fluid quality: Special Fluid Dexron ® II - see also "Technical Data".
Inspect 
Important! 
