Special Service Tools (Group M)
|
KM-128-A |
Test Equipment |
|
To check V-belt tension |
|
KM-210-B |
Wheel Puller |
|
To remove steering wheel from steering shaft |
|
KM-354-B |
Pressure Gauge |
|
To check the power steering fluid pressure |
|
KM-507-C |
Ball Joint Remover |
|
To press tie rods out of steering knuckle |
|
KM-583-A |
Adapter |
|
To remove and install snap ring on steering shaft, steering column with "height adjustable steering wheel" in conjunction with KM-J-23653-A |
|
KM-J-23653-A |
Low Pressure System |
|
To remove and install snap ring on steering shaft, steering column with "height adjustable steering wheel" in conjunction with KM-583-A |
| 
|
Special Service Tools (Continued)
|
KM-584 |
Remover/Installer |
|
To remove and install pressure spring for height adjustment, steering column with height adjustable steering wheel |
|
KM-585 |
Remover |
|
To pull fulcrum bearing pins out of bearing housing, steering column with "height adjustable steering wheel" |
|
MKM-604-29 |
Torx Bit TX30/70 1/4" |
|
To install airbag unit |
|
KM-903 |
Adapter |
|
To check fluid pressure of power steering in conjunction with KM-354-B |
|
KM-903-10 |
Adapter Piece for KM-903 |
|
To check fluid pressure of power steering in conjunction with KM-354-B and KM-903 |
|
KM-913-A |
Ribbed V-belt Chuck Key |
|
To tension/release ribbed V-belt tension roller |
| 
|
Special Service Tools (Continued)
|
KM-988 |
Gauge |
|
To adjust steering wheel contact unit:
RHD vehicles as of MY '98 to 10/98,
LHD vehicles as of 10/98. |
|
KM-989-A |
Gauge |
|
To adjust steering wheel for 4-spoke-steering wheel as of MY '98 |
|
KM-J-22610 |
Clamp Pliers |
|
To clamp bellows retaining straps |
| 
|
|
