|
C-07, Driver's door knob circuit |
|
Test |
Instructions |
Nominal value |
|
T01 |
Measure resistance |
|
|
|
• Disconnect wiring harness plug (12 pin) from anti-theft warning system control unit & central door locking K94 • Driver's door knob released • Measure resistance between wiring harness plug
(12 pin) K94/terminal 6 and ground
|
Lower than 2 Ω
|
|
|
Yes: T02 |
No: T03 |
|
T02 |
Measure resistance |
|
|
|
• Disconnect wiring harness plug (12 pin) from anti-theft warning system control unit & central door locking K94 • Driver's door knob locked • Measure resistance between wiring harness plug
(12 pin) K94/terminal 2 and ground
|
Lower than 2 Ω
|
|
|
Yes: E08 |
No: T08 |
|
T03 |
Measure resistance |
|
|
|
• Separate body wiring harness plug & driver's door X15 • Disconnect wiring harness plug (12 pin) from anti-theft warning system control unit & central door locking K94 • Measure resistance between wiring harness plug
(12 pin) K94/terminal 6 and X15/terminal 16 (bushing)
|
Lower than 2 Ω
|
|
|
Yes: T04 |
No: E01 |
|
T04 |
Measure resistance |
|
|
|
• Separate body wiring harness plug & driver's door X15 • Disconnect wiring harness plug from central door locking motor M18 • Measure resistance between wiring harness plug X15/terminal 16 and central door locking motor wiring harness plug M18/terminal 2, LHD or M18/terminal 7, RHD
|
Lower than 2 Ω
|
|
|
Yes: T05 |
No: E02 |
|
T05 |
Measure resistance |
|
|
|
• Disconnect wiring harness plug from central door locking motor M18 • Driver's door knob released • Measure resistance between wiring harness plug M18/terminal 2, LHD and M18/terminal 1, LHD or M18/terminal 7, RHD and M18/terminal 6, RHD
|
Lower than 2 Ω
|
|
|
Yes: T06 |
No: E03 |
|
T06 |
Measure resistance |
|
|
|
• Separate body wiring harness plug & driver's door X15 • Measure resistance between wiring harness plug X15/terminal 29 and ground
|
Lower than 2 Ω
|
|
|
Yes: T07 |
No: E04 |
|
T07 |
Measure resistance |
|
|
|
• Separate body wiring harness plug & driver's door X15 • Disconnect wiring harness plug from central door locking motor M18 • Measure resistance between wiring harness plug X15/terminal 29 (bushing) and M18/terminal 1, LHD or M18/terminal 6, RHD
|
Lower than 2 Ω
|
|
|
Yes: T02 |
No: E05 |
|
T08 |
Measure resistance |
|
|
|
• Separate body wiring harness plug & driver's door X15 • Disconnect wiring harness plug from anti-theft warning system control unit & central door locking K94 (12 pin) • Measure resistance between wiring harness plug K94/terminal 2 and X15/terminal 8 (bushing)
|
Lower than 2 Ω
|
|
|
Yes: T09 |
No: E06 |
|
T09 |
Measure resistance |
|
|
|
• Separate body wiring harness plug & driver's door X15 • Disconnect wiring harness plug from central door locking motor M18 • Measure resistance between wiring harness plug X15/terminal 8 and M18/terminal 4, LHD or M18/terminal 9, RHD
|
Lower than 2 Ω
|
|
|
Yes: T10 |
No: E07 |
|
T10 |
Measure resistance |
|
|
|
• Disconnect wiring harness plug from central door locking motor M18 • Driver's door knob locked • Measure resistance between M18/terminal 4, LHD and M18/terminal 1, LHD or M18/terminal 9, RHD and M18/terminal 6, RHD
|
Lower than 2 Ω
|
|
|
Yes: E08 |
No: E03 |
