• Disconnect wiring harness plug from anti-theft warning system control unit & central door locking K94 (28 pin)
• Open driver's door
• Measure resistance between wiring harness plug K94/terminal 15 and ground
Lower than 2 Ω
Yes: T03
No: T02
T02
Measure resistance
• Disconnect wiring harness plug from anti-theft warning system control unit & central door locking K94 (28 pin)
• Measure resistance between wiring harness plug K94/terminal 15 and driver's door contact switch (S16 LHD, S17 RHD) blue lead
Lower than 2 Ω
Yes: T03
No: E01
03
Measure resistance
• Disconnect wiring harness plug from anti-theft warning system control unit & central door locking K94 (28 pin)
• Close driver's door
• Measure resistance between wiring harness plug K94/terminal 15 and ground
Greater than 100 k Ω
Yes: E02
No: E03
C-08, Driver's door contact switch circuit
No.
Result
E01
• Interruption in lead between anti-theft warning system control unit wiring harness plug & central door locking (28 pin) K94/terminal 15 and driver's door contact switch
E02
• Driver's door contact switch defective (locking contact no longer locks)
or
• Anti-theft warning system control unit & central door locking K94 defective