Vauxhall Workshop Service and Repair Manuals

Display and Multi-function Button, Remove and Install  

  Important!   

Before working on navigation system components: Remove the CD from the navigation control unit, switch off ignition and remove fuse.   Vehicles with supply voltage via relay box in engine compartment:   Remove fuse in engine compartment relay box (F500).   Vehicles with supply voltage via fuse box for instrument panel:   Remove fuse F22 (20A) from fuse box in vehicle interior.     Remove, Disconnect    Unclip outer panels (lower controls).   Unscrew display and multi-function button (arrows = concealed screws).   Disconnect wiring harness plug for display and cigarette lighter.   Remove cigarette lighter and bracket.

  Install, Connect   

Connect wiring harness plug for display and cigarette lighter.  

Insert fuses. Insert CD in navigation control unit and switch on ignition.  

  Inspect   

Perform operational test.  

  Install, Connect   

Install display and multi-function button. Install cigarette lighter and bracket.  

Clip on both outer panels.