Beetle L4-1.9L DSL Turbo (ALH) (1998)
Lock Carrier: Locations
Lock carrier, assembly overview
1. Lock carrier with attachments
Removing:
Remove front part, refer to Front End, Assembly Overview See: Service and Repair/Procedures
Unhook Bowden cable at lock and disconnect electrical connectors.
Unbolt radiator and condenser from lock carrier.
Secure radiator and condenser in engine compartment.
Note:
Do not hang condenser up on its lines. Do not kink condenser lines.
Remove lock carrier with connecting plate and lock.
Installing:
Align lock carrier within enlongated holes.
Adjust headlights.
2. Bolt