Beetle L4-2.0L (AEG) (2000)
If specifications obtained
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
If specification not obtained
-
Take road test to free Oxygen sensor of possible residues and repeat the test.
Observe the appropriate safety precautions during road test.
If specification again not obtained
-
Replace Oxygen sensor before Three Way Catalyst G39.
-
Display the Readiness code. Refer to "Monitors, Trips and/or Drive Cycle (Readiness Codes)/Displaying Readiness Code", See: Computers and
Control Systems/Testing and Inspection
-
If DTC memory was erased or if the ECM was disconnected from Battery + , set the Readiness code. Refer to "Monitors, Trips and/or Drive Cycle
(Readiness Codes)/Setting Readiness Code", See: Computers and Control Systems/Testing and Inspection