CC (357) V6-3.6L (BLV) (2009)
^
Select "01 - Engine electronics" -arrow-
^
Select "006 - Basic setting" -arrow-
^
Enter Display group 4
^
Check voltage. Battery MUST have a minimum no load charge between 12.5V and 14.5V
^
Once proper voltage has been established, select ¢¥ arrow to end Vehicle Self-Diagnosis.
Note:
Issues with vehicle limiting the ability to establish proper voltage are not covered under this Technical Bulletin
^
Ensure that scan tool is connected to the on-line network
^
Select "Guided Fault Finding" -arrow-