Eos (1F7) L4-2.0L Turbo (BPY) (2007)
^
Contact surface between toothed belt gear, diamond disc and crankshaft must be free of oil.
^
Center bolt must be replaced.
^
The threads and shoulder must be free of oil and grease.
-
Put on toothed belt gear - 2 - with diamond disc - 3 - and tighten bolt - 1 - hand-tight.
-
Secure toothed belt gear using Counter Support 3415.
-
Tighten new center bolt to 90 Nm plus an additional 90° (1/4 turn, additional rotation may occur in several stages).
The rest of assembly is in reverse order of disassembling.
Install toothed belt and adjust valve timing.