Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove starter upward and out of vehicle.
Installing:
Install in reverse order of removal, noting the following:
‹› All hose connections for charge air system are secured by spring-type clamps or by connector couplings. The following must be observed with
connector couplings:
‹› Connect hose/pipe without tools.
‹› Make sure retaining tabs lock securely - arrow -.
-
Tighten all threaded connections to the specification shown in => [ Starter Tightening Specifications ] See: Specifications.