Eos (1F7) L4-2.0L Turbo (BPY) (2007)
^
Always replace after removal
12 -
Brake disc
13 -
Bolt
^
4 Nm
14 -
Dust cap
^
Always replace after removal
^
Pressing off and driving in
^
An appropriate seal can only be achieved with a new dust cap.
15 -
Bolt
^
M16 x 1.5 x 70
^
200 Nm plus an additional 180° turn
^
Loosen and tighten using socket insert XZN 18 T10162
^
Always replace after removal
16 -
Wheel hub with wheel bearing
^
Sensor ring for ABS is installed in wheel hub
The wheel bearing and wheel hub are installed together in a housing.
This wheel bearing/hub unit is maintenance and adjustment free. Adjusting and servicing is not possible!
17 -
Bolt
^
12 Nm
18 -
Cover plate
19 -
Bolt
^
M12 x 1.5 x 80
^
90 Nm plus an additional 90° turn
^
Always replace after removal
20 -
Bonded rubber bushing
21 -
Bolt
^
50 Nm plus an additional 45° turn
^
Always replace after removal