Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2106023.png)
‹› The cables must run parallel to each other and must not intersect.
‹› The cables must be routed in the provided recesses in the heat shield - 3 -.
‹› The enlargement shows the heat shield from above.
A clip - A - holds the cables and heat shield to each other in place.
The holes in the cable retainers have various diameters.
Allocation of cable retainers, refer to => [ Allocation of Cable
Retainers ] See: 02Q Transmission/Shift Mechanism Overview.
-
Apply a small amount of grease on the pins - arrows - on the transmission shift lever - 1 - and on the relay lever - 2 -.
