Eos (1F7) L4-2.0L Turbo (CBFA) (2008)
Installing:
Install in reverse order of removal, noting the following:
-
Secure tail lamp by first tightening upper flange nut - A - then the lower to 3 Nm.
‹› Adjustment elements, by which the tail lamp can be aligned to the rear lid and to the side panel, are located in both threaded pins of flange nuts -
A -.
Tail lamp outer edge - arrow A - can be adjusted in both directions - arrow B -.
-
Turn corresponding adjustment element - 1 - clockwise or counterclockwise until the outer edge of the tail lamp - arrow A - is flush with the body
edges.
-
Install bolt - A - and tighten it to 2 Nm.
Tightening specifications overview, refer to => [ Tail Lamps in Side Panel Tightening Specifications ] See: Specifications/Exterior Lights, Lamps and
Switches Tightening Specifications.
-
Attach cover - A - starting at the top and working downward - arrow 4 to arrow 1 - onto tail lamp - B -.