Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Oil Pan: Service and Repair
Oil Separator
Oil Separator
Removing
-
Remove the noise insulation.
-
Remove the bolts - 1 through 9 - and remove the oil separator.
Risk of contaminating the lubricating system.
‹› Seal the opening with a clean cloth.
Installing
‹› Always replace gaskets and seals.
‹› Secure all hose connections with hose clamps appropriate for the model.
Installation is performed in the reverse order of removal, noting the following:
-
Tighten bolts in sequence - 1 through 9 - to 9 Nm.